This post contains affiliate links. This means I will make a commission at no extra cost to you should you click through and make a purchase [ “As an Amazon Associate, I earn from qualifying purchases.” ]. Read the full disclosure here.
P0355 Ford F150 GuideMechanic.Com The Ford F-150 has been a mainstay of the automotive industry since 1975, and the 2020 model is no exception.
The Ford F-150 P0355 is a popular full-size pickup truck that is known for its power, performance, and reliability. It features a 3.5L EcoBoost V6 engine, 10-speed transmission, and an available off-road package.
With its rugged exterior, comfortable interior, and impressive list of features, the Ford F-150 P0355 is an excellent choice for those looking for a dependable and capable pickup truck.
P0355 Ford F150
Common Causes
The Ford F150 P0355 code is a generic diagnostic trouble code (DTC) that indicates a malfunction in the ignition coil “E” primary circuit. This code is associated with a wide range of common issues that can affect the performance of the vehicle’s ignition system. The most common causes of this code include a faulty ignition coil, a faulty ignition control module, a loose or corroded wire connection, an incorrect spark plug gap, or a damaged distributor cap and rotor.
In order to diagnose the cause of the code, it is necessary to inspect all of the components in the ignition system. This involves visually inspecting the wiring for any loose or corroded connections, checking the spark plug gap, and testing the ignition coil with a multimeter. If any of these components are found to be faulty or damaged, they should be replaced. If the problem is not resolved after these steps, the ignition control module may need to be replaced.
Diagnosing a Ford F150 P0355 Code
A Ford F150 with a P0355 code indicates that there is an issue with the ignition coil primary/secondary circuit. The code is stored in the vehicle’s powertrain control module (PCM).
The primary/secondary circuit refers to a circuit that operates the ignition coils. In most vehicles, the ignition coils are responsible for converting the battery’s voltage into the high-voltage current necessary to ignite the fuel in the combustion chamber.
To diagnose a P0355 code, the first step is to check for any stored codes in the PCM. If any other codes are present, they should be addressed first. If no other codes are present, then the ignition coils should be tested.
This can be done by measuring the resistance of each coil with an ohmmeter. The resistance should match the manufacturer’s specifications. If the resistance is not within the specified range, then the ignition coil should be replaced.
Next, the voltage at the coil should be checked. This can be done with a multimeter. The voltage should be within the specified range. If the voltage is not within the specified range, then the wiring between the coil and the PCM should be checked for any shorts or breaks. If any issues are found, they should be repaired.
Finally, the spark plugs should be checked. This can be done by removing the spark plugs and inspecting them for wear or damage. If the spark plugs are worn or damaged, they should be replaced.
Once all of these steps have been completed, the P0355 code should be cleared from the PCM. If the code returns, then further diagnosis may be necessary.
What to Look Out for When Replacing a Ford F150’s Ignition Coil
When replacing the ignition coil of a Ford F150, there are several important steps to take in order to ensure a successful installation. Firstly, it is important to ensure that the ignition coil is compatible with the model and year of the truck. It is also important to refer to the owner’s manual to ensure that the installation instructions are followed correctly.
Once the correct coil is identified, it should be disconnected from the battery and any other electrical components to ensure safety. It is also important to note that the ignition coil should be mounted securely to the engine block to reduce the risk of damage.
Before installation, the spark plug wires should be disconnected and replaced if necessary. It is recommended to use anti-seize lubricant to ensure that the spark plug is fitted correctly and securely. Once the ignition coil is securely in place, the spark plug wires should be reconnected.
Finally, it is important to ensure that all electrical connections are secure and that the engine is running correctly. If any problems are encountered, the owner’s manual should be consulted and the installation instructions should be followed closely. By following these steps, the ignition coil of a Ford F150 can be replaced safely and properly.
Understanding the Impact of a Ford F150 P0355 Code on Vehicle Performance
A Ford F150 P0355 code is a diagnostic trouble code (DTC) that indicates a malfunction in the vehicle’s ignition coil “F” primary/secondary circuit. When this code is stored in the vehicle’s computer, it can have a negative impact on the vehicle’s performance and drivability.
The ignition coils are responsible for providing the spark necessary to ignite the fuel in the engine’s combustion chamber. When the ignition coil is malfunctioning, the spark can be weak or intermittent, resulting in misfires and a decrease in overall engine performance.
In addition, if the P0355 code is not addressed promptly, it can lead to further engine damage. This can include a buildup of unburned fuel in the cylinder and oil, as well as potentially damaging the catalytic converter.
It is important to diagnose and repair the cause of the P0355 code as soon as possible. Common causes of this code include faulty spark plugs and plug wires, a failing ignition coil, a defective ignition control module, and an engine vacuum leak.
If you are experiencing a decrease in engine performance or other symptoms associated with a P0355 code, it is important to have the vehicle inspected and repaired by a qualified technician as soon as possible. Doing so can help prevent further engine damage and ensure that your vehicle is running at optimal performance.
How to Resolve a Ford F150 P0355 Code
Diagnosing and resolving a Ford F150 P0355 code can be a daunting task. However, with the right knowledge and tools, the process can be made significantly easier. This article will provide a step-by-step guide on how to diagnose and resolve this code.
The first step is to obtain the vehicle’s diagnostic trouble code (DTC). This code can be accessed by using an OBD-II scanner. Once the code is obtained, the next step is to identify the cause of the code. The most common causes of this code are a faulty ignition coil, an open or shorted circuit, a poor connection, or a faulty spark plug.
After identifying the cause, the next step is to troubleshoot the issue. This can involve inspecting wiring and connections, testing the ignition coil, and checking the spark plug. If the issue is with the ignition coil, it should be replaced, and the spark plug should be replaced if it is faulty. If the issue is with a wiring or connection, it should be inspected and repaired.
Finally, the code should be cleared with the OBD-II scanner and the vehicle should be tested to ensure that the code does not reappear. If the code does reappear, then further diagnosis and troubleshooting may be needed.
In conclusion, diagnosing and resolving a Ford F150 P0355 code is a complex process. However, with the right knowledge and tools, the process can be made much easier. It is important to remember to inspect wiring and connections, replace any faulty parts, and test the vehicle after the repair is complete.
Identifying the Signs of a Failing Ignition Coil in a Ford F150
The ignition coil in a Ford F150 is an essential component of the vehicle’s electrical system, as it is responsible for providing the spark to ignite the air-fuel mixture in the engine. When the ignition coil fails, the vehicle will experience a range of symptoms that can be identified.
The most common symptom of a failing ignition coil is difficulty starting the engine. When the coil is failing, the spark plug will not be able to ignite the fuel-air mixture, resulting in a crank-no-start condition. Additionally, the engine may misfire if the ignition coil is faulty.
A further indicator of a failing ignition coil is an illuminated ‘check engine’ light on the dashboard. The light will be triggered by the Engine Control Module (ECM) when it detects an issue with the ignition coil.
A steady decrease in fuel economy may also be indicative of a faulty ignition coil. As the coil is responsible for providing the spark to ignite the fuel-air mixture, an inefficient spark will cause the engine to run lean and under-perform, resulting in a decrease in fuel economy.
Finally, a bad odour may be noticed coming from the engine bay when the ignition coil is failing. As the coil is responsible for providing the spark to ignite the fuel-air mixture, a faulty coil will cause the fuel to burn inefficiently, resulting in a pungent odour.
If any of these symptoms are noticed, the ignition coil should be checked and replaced if necessary.
Reviewing the Benefits of Upgrading to a High-Performance Ignition Coil for Ford F150
Upgrading to a high-performance ignition coil for Ford F150 is a great way to maximize the efficiency and power of the engine. The ignition coil is a vital part of the vehicle’s ignition system and is responsible for providing the spark needed to ignite the air-fuel mixture in the combustion chamber. A high-performance ignition coil can provide improved performance, greater fuel economy, and reduced emissions.
The most noticeable benefit of upgrading to a high-performance ignition coil is increased engine power and torque. The increased spark energy produced by the upgraded coil helps to ignite the air-fuel mixture more efficiently and completely.
This improved combustion process results in more power and torque being generated by the engine, which can translate to better acceleration and improved towing capability.
In addition to improved engine performance, a high-performance ignition coil can also provide improved fuel economy. The improved combustion process enabled by the upgraded coil helps to burn fuel more efficiently, resulting in improved fuel economy. This can save money in the long run, as less fuel needs to be consumed to achieve the same level of performance.
Finally, upgrading to a high-performance ignition coil can also help to reduce emissions. The improved combustion process enabled by the upgraded coil helps to burn fuel more completely, resulting in fewer pollutants being released into the environment. This can help to improve air quality and reduce the effects of global warming.
In conclusion, upgrading to a high-performance ignition coil for Ford F150 is a great way to maximize the efficiency and power of the engine. The increased spark energy produced by the upgraded coil helps to ignite the air-fuel mixture more efficiently and completely, resulting in improved performance, greater fuel economy, and reduced emissions.
Strategies for Preventing a Ford F150 P0355 Code from Occurring
1. Ensure that the spark plugs and spark plug wires are in good condition. Spark plugs that are worn or faulty can cause misfires, which can lead to a P0355 code.
2. Check the ignition coil and its wiring. If the wiring is faulty or the coil is damaged, it can cause a misfire and trigger a P0355 code.
3. Ensure the fuel injectors are clean and the fuel pressure is correct. Low fuel pressure or clogged fuel injectors can cause misfires and lead to a P0355 code.
4. Ensure the engine has the correct amount of oil, as low oil levels can cause misfires and trigger a P0355 code.
5. Check the oxygen sensor for proper operation. If the oxygen sensor is not working correctly, it can cause misfires and lead to a P0355 code.
6. Ensure that the mass airflow sensor is working correctly. If the MAF sensor is not working correctly, it can cause misfires and lead to a P0355 code.
7. Check the air filter and replace it if necessary. A dirty air filter can cause misfires, which can lead to a P0355 code.
8. Ensure that the engine is properly tuned and that the ECU settings are correct. Incorrect ECU settings can cause misfires and lead to a P0355 code.
9. Ensure that the engine is in good condition and that all components are in proper working order. If any components are worn or faulty, it can cause misfires and lead to a P0355 code.
Conclusion
The Ford F-150 P0355 is an excellent truck for those looking for power, reliability, and convenience. Its powerful 3.5L EcoBoost engine offers plenty of power for hauling and towing, and its 8-speed automatic transmission provides smooth and consistent shifts.
Its suite of driver-assist features, such as the SYNC 3 infotainment system, makes it a great choice for those looking for a dependable and tech-savvy truck. With its excellent value proposition, the P0355 is an impressive truck that is sure to please.
- P007F 62 Code Range Rover - June 10, 2024
- P007F Ford Focus: Causes, Diagnosis, and Solutions - June 5, 2024
- P0080 Ford: Causes, Diagnosis, and Solutions - May 31, 2024